If one is a fan of dolls, then he would most likely take pleasure in owning ball jointed dolls because these dolls are some of the most beautiful types. Now a ball jointed doll or simply a BJD doll, is a doll that is connected by balls and joints. Now the good thing about these things is that they are very easy to make and can be made at home.
Now the very first thing that one should do before he starts his project would be to create a design for his figure. Now this is probably the most important part because it is in this part that one will be creating the blueprint for his project. Now he may draw his design on his notebook and edit it along the way.
Once he has already made the design, then the very next step would be to buy the necessary materials for the project. Now the best thing that one could use for this type of endeavor would be Super Sculpey. Super Sculpey is a mold or clay like material that is very sturdy and can be used to make the figure.
Now before doing anything with the Sculpey, the first thing that one has to do would be to first create the skeleton of the different body parts using wires. So one should create the arms, the legs, the head, and other parts with the wires. Now do take note that he has to use really hard wires in order to do this project because the hard wires are the ones that will keep the figure intact.
Once this is done, then the next thing to do would be to put some masking tape on the edges of the pieces like the arms, legs, head etc. Now take note that the masking tape has to be put there so that a ball will form. When that is already done, then one has to now wrap the wire with some foil.
Now after that has already been done, then the next part would be to add the Super Sculpey on the skeleton. When starting out, one should first rub a very thin layer of the Sculpey on the body parts. When one has already done this, then one may just add more of the Sculpey as much as he pleases.
Now after putting a thin layer of Sculpey there, then the next thing to do would be to add more and build the figure. Now during this step, one can be creative and make the doll look like whatever he wants. Of course he also has to carve the face in which he can use different paints and accessories for the eyes, the mouth, and the nose.
Now after creating all the parts, the very last thing to do would be to assemble the whole thing. Now the ball that was made with the masking tape earlier is now covered with Sculpey and will be attached to a joint. Once all of these parts are connected, then the very last step would be to bake the figure in an oven and take it out once it hardens.
Now the very first thing that one should do before he starts his project would be to create a design for his figure. Now this is probably the most important part because it is in this part that one will be creating the blueprint for his project. Now he may draw his design on his notebook and edit it along the way.
Once he has already made the design, then the very next step would be to buy the necessary materials for the project. Now the best thing that one could use for this type of endeavor would be Super Sculpey. Super Sculpey is a mold or clay like material that is very sturdy and can be used to make the figure.
Now before doing anything with the Sculpey, the first thing that one has to do would be to first create the skeleton of the different body parts using wires. So one should create the arms, the legs, the head, and other parts with the wires. Now do take note that he has to use really hard wires in order to do this project because the hard wires are the ones that will keep the figure intact.
Once this is done, then the next thing to do would be to put some masking tape on the edges of the pieces like the arms, legs, head etc. Now take note that the masking tape has to be put there so that a ball will form. When that is already done, then one has to now wrap the wire with some foil.
Now after that has already been done, then the next part would be to add the Super Sculpey on the skeleton. When starting out, one should first rub a very thin layer of the Sculpey on the body parts. When one has already done this, then one may just add more of the Sculpey as much as he pleases.
Now after putting a thin layer of Sculpey there, then the next thing to do would be to add more and build the figure. Now during this step, one can be creative and make the doll look like whatever he wants. Of course he also has to carve the face in which he can use different paints and accessories for the eyes, the mouth, and the nose.
Now after creating all the parts, the very last thing to do would be to assemble the whole thing. Now the ball that was made with the masking tape earlier is now covered with Sculpey and will be attached to a joint. Once all of these parts are connected, then the very last step would be to bake the figure in an oven and take it out once it hardens.
Aucun commentaire:
Enregistrer un commentaire